Solved: I recently had a LCON send me a vulnerability report for his location asking me for assistance in reconciling some concerns. One of them was disabling SSL 2.0 and 3.0. On this same document we're server vulnerabilities as well. Although the

This document describes the information to help you secure your Cisco IOS® system devices, which increases the overall security of your network.

Solved: What is the easiest way to disable telnet on the public (T1) interfaces of my routers and enable SSH? Can I do this without setting up access lists? Thanks, Diego

Hello, here is how I understand it to work: ntp allow mode control 0 --> causes the device to respond to mode 6 packet without delay (not recommended) ntp allow mode control 3 --> causes the device to respond to mode 6 packet with a delay of 3

Telnet lets you manage Cisco switches and routers remotely however it is not very secure. This article explains how to disable Telnet on Cisco devices

Link to HPE MSR 954 Firmware release notes

Release notes blog for Aruba Instant On

Juniper Mist alert framework

juniper mist AP connectivity with Mist Portal

Juniper Mist ap settings

Description
Link health monitoring measures the health of links by sending probing signals to a server and measuring the link quality based on latency, jitter, and packet loss.

Solution
Link-monitor can be configured for status checks.
There is no option to configure link-monitor from GUI and can be configured from CLI only.

MSP registration page:
https://partners.mist.com/s/msp

Description
In order for a URL-Filter to work properly when it is activated on the Web-Filter profile, it must be defined with the correct type of entry.

Solution
Simple: A simple URL-Filter entry could be a regular URL, for example, www.fortinet.com
URL: fortinet.com
URL: fortinet.com/support